Laptop screen replacement

Laptop screen replacement is a procedure becoming more and more popular as specialist laptop screen repairs become more perfected. No matter what make or model your laptop is, there are only four real major laptop screen replacement manufacturers.These companies make or fabricate lcd and led panels for pretty much any type of tech gadget with an lcd or led screen. It is important to ensure you buy any screen type from a reputable source. The process of actually performing a dell screen replacement, Acer screen replacement, or a Sonyvaio screen replacement all follow the same principles.These steps are as follows:

1. Identify the model number of the screen not just the laptop Model Number.

2. To do this you need to follow a break down step by step procedure of removing the outer bezel which normally is secured by rubber grommets. Before this is done, please ensure the Laptop battery has been removed and no power is connected to the laptop what so ever. Behind these grommets are tiny screws which must be removed using a extra small spline head screw driver. Sometimes these bezels are not held by screws in this case you must use a very delicate procedure with a blade instrument. I suggest looking up iPhone Repair kits to buy the correct tools. 

3. Once the bezel is removed, it is possible to identify the screws holding the actual panel in place to the chassis.

4. Carefully remove the power supply, and sometimes Wi-Fi aerial cables. 

5. At this point identify the correct model of the screen. You will note the power cable either runs from the left side of the laptop, or the right. This is crucial in ordering correct screen type. 

6. Using a reputable supplier of replacement screens you can buy most 15.6" panels.

7. The process is then simply reverse engineered, by swapping the old for new screen. 

8. The final procedure is to re insert the laptop battery. 

9. We strongly recommend the use of taking photos or a video of the screen breakdown and also lay the screws in a small egg cup size vessel in order to not accidentally lose them. They are often tiny screws. By recording the break down, the reverse engineering process is made much easier.

Doing this yourself will always be a risky procedure, seeing as there are so many parts. Even the experienced hands are prone to making a mistake through this process. It is advisable that you get someone with experience to do the work for you. If you would like to do this yourself, it is perhaps a great idea to start with cheap devices that will not matter much if you break them. Once you are more experienced, you may begin to work on these devices yourself. Saving money may become more expensive if you risk your device to inexperienced hands. It is also worth noting that this is not a quick job for the most part, it takes time for this precision.

Article Resources: - https://medium.com/@jesselolly/laptop-screen-replacement-93522130ebd3#.v6spol6jr